Downloads

Copy the file onto a USB memory stick or into a shared folder on your PC that you know can be accesses via the Beyonwiz.
If you copied in onto a USB memory stick, connect the USB memory stick to the USB port on the front of your Beyonwiz.
Press SETUP on your Remote Control and use the right arrow to scroll to system and press OK.
Scroll down to Firmware Upgrade and press OK.
Select USB or Network and locate the firmware are file.
Highlight the firmware, press OK and follow the prompts to update your firmware.

If your Beyonwiz behave strangely after the firmware upgrade you should reset to factory settings, then rescan the channels and setup your Beyonwiz.
To Reset Scroll down to initialize in the System Menu and select Factory Setting.
If you lose picture after a Factory Reset press the TV-Out button on your Remote Control and wait a few seconds. If still no picture continue to press TV-Out and wait a few seconds until the correct output in found.
If you have any problems during the Upgrade procdure or resetting your Beyonwiz please call 1300 889 803 and dial 1 for any assistance.